Spark Surge St Pro

Sharing the same advanced design as the regular Surge ST, the Pro version up’s the ante with the addition of premium materials. Built for big days on big lines, the Pro utilises the lightweight solid baseplate design, giving lightning fast response and absolute control. The stiffer carbon reinforced Rip ‘N’ Flip highbacks, and more supportive Pillow Line ankle straps combine to give riders greater control in demanding terrain. All Surge bindings incorporate our industry-leading Tesla T1 technology. Every piece of this binding is made in-house with the exception of a few screws and the buckles!

In the Box: Bindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.

What else do I need? A set of Spark Pucks or Spark Canted Pucks.

• Features Tesla T1 System anatomy: built-in climbing wire, 2-position heel rest, newly optimized snap ramps, and new Fusion moulded side-lock touring brackets.

• Whammy Bar climbing wire: A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

• Rip 'N' Flip Highback: The R&D shines with a shape built from 3D scans of popular splitboard boot models and a list of rad features designed specifically for and fully appreciated by the splitboarder. The Surge ST Pro highback has a high amount of carbon fibre fill for a stiff ride and maximum response. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

• Snap Ramps & Side-Lock Tesla Touring Brackets: T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal.

• Puck Compatibility: Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment. Available in a flat and a 3° canted model. Note that pucks do not come with the bindings out of the box and must be purchased separately.

• T1 Heel Rest: The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

• Pillow Line straps: Surge Pillow Line Straps are lightweight - 53% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Surge ankle straps have a wide, asymmetrical footprint around the boot for incredible all-around support. The toe straps come in one construction for both Arc and Surge models, and are designed to be used as a toe cap but also fit traditionally over the top.

• Buckles and Plastic: Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. All straps incorporate Burton's time-tested bomber buckles.